Whole-Home Air Purifiers in Saket, South Delhi
One system for the whole home — not one machine per room. aqi0 is a whole-home air purifier: technically, a positive-pressure fresh air system that pulls outdoor air through H13 HEPA filtration and gently pressurises your home, so clean air reaches every room while stale air is pushed out.
Saket families live with two air problems at once: the traffic corridor along Press Enclave Road and the Outer Ring Road keeps PM2.5 elevated through the day, and sealed flats — run closed for AC in summer and against smog in winter — let CO₂ climb overnight in closed bedrooms. A room purifier addresses only the first problem, in only one room. A fresh air system addresses both, everywhere in the home.
Installing in Saket homes
- DDA flats (A–J blocks, Saket). Compact layouts suit a single unit near the utility balcony or service shaft. A 10-inch core cut through the external wall is a clean, one-day job in this construction.
- Builder floors. The most common Saket install. The unit typically sits on the rear service balcony; ducting runs above the false ceiling to a central diffuser point.
- Independent homes near Press Enclave Road. Placement matters here — we position the intake on the face of the house away from the traffic corridor, drawing from the cleanest available air pocket.
Every install includes the site survey, core cut (or glass cut), louver, ducting, electrical connection and an AQI reading before and after — so you see the difference the same day.
Saket’s air, honestly
South Delhi’s annual PM2.5 average runs 80–110 µg/m³ — several times the WHO 24-hour guideline of 15 µg/m³ — and stays elevated 9–10 months of the year, not just in winter. Saket’s specific burden is vehicular: the Press Enclave corridor, the mall cluster’s traffic churn, and the Outer Ring Road all feed a steady baseline of fine particles that a closed window does not keep out.
With an aqi0 system running 24/7, homes typically hold indoor PM2.5 under 15 µg/m³ — and because the system continuously brings in fresh filtered air, bedroom CO₂ stays in the 600–800 ppm range overnight instead of climbing past 1,200 ppm the way sealed bedrooms do.
Pricing
Standard pricing applies in Saket — ₹70,000 + GST (₹82,600 all-in), installation included. Annual maintenance is ₹12,500 + GST with a minimum of six filter changes a year. Site visit within 48–72 hours; install within 5–7 days.
FAQ
Does one unit really cover a full Saket builder floor?
Yes. One system covers up to 2,000 sq ft — a typical 3–4 BHK builder floor — with a full air change roughly every 30–60 minutes depending on size. Larger duplexes above 2,500 sq ft take two units.
I’m on a high floor of a DDA block — can you still install?
Yes. Higher floors often have cleaner intake air, above the street-level dust layer. The install method is identical; the site survey confirms wall access and the best intake face.
Will the RWA object to the exterior grille?
We provide installation drawings and specs for RWA approval. The louvered grille is discrete, sits flush with the wall, and can be painted to match the façade.